MIPS FILTER SIXDESIGN NICKEL
This nickel coated Sixdesign filter is especially suitable for watercooling loops with nozzle- or micro-structure waterblocks.
It prevents a clogging of the waterblocks which are nowadays often hard nor not possible to clean due to the fine and sophisticated cooling geometry.
The filter is equipped with a prechamber with a diameter of 19mm and a depth of 1,5mm on both the Inlet and Outlet side.
Cleaning of the filter is quick and easy: Simply screw open the filter, remove the mesh and clean it with e.g. a toothbrush.
The flow rates remain virtually unaffected even with the very fine stainless steel mesh.
For illustration here a flow rate table with a competing filter unit:
AP 1500 tat 24V + DDC at 24 V in-line:
- Go-Cooling: 156 L/h
- Sixdesign (fine mesh): 183 L/h
- No filter in the loop: 187 L/h
AP 1500 at 24V
- Go-Cooling: 100 L/h
- Sixdesign (fine mesh): 119 L/h
- No filter in the loop: 120 L/h
AP 1500 at 12V (=AP 900)
- Go-Cooling: 56 L/h
- Sixdesign (fine mesh):) 67 L/h
- No filter in the loop: 68 L/h
Technical specifications:
Overall size without fittings: 38 x 27 x 23 mm (L x W x H)
Weight: ~92g
Front- respectively backplate: Nickel plated brass 2 x 10mm
Mesh: Stainless steel (2 pieces included)
Connection thread: 1/4´´
Extent of delivery:
1x MIPS watercooling filter Sixdesign Nickel
2 stainless steel mesh filters
0